High temperature sterilization infrared tunnel furnace, the submersible pump is located at the bottom of the cold water tank, the output end of the condensation pipe is connected to the pipeline, and the pipeline is extended to the inner side of the hot water tank, the top of the warm oven is provided with more than four exhaust windows, exhaust The lower end of the air window is provided with a constant sieve plate, a ventilation fan bracket is arranged above the constant sieve plate, an exhaust fan is arranged on the ventilation fan bracket, an iron core is arranged in the middle of the constant sieve plate, and the exhaust fan is located on one side of the iron core. A coil is wound around the circumference of the iron core, and a spring is set on the outside of the iron core. The lower end of the spring and the constant sieve plate remain unchanged and continuous. The quality sealing plug is inserted into the upper end of the exhaust window. The high-temperature sterilization infrared tunnel furnace can quickly cool down the oven, shorten the electricity consumption time and reduce the energy consumption.

Energy-saving infrared tunnel furnace, outer casing, inner casing, atmosphere channel, conveyor belt, heat exchanger, air inlet, heat pump system, electric fan, heating device, air flow distributor and exhaust pipe, etc., the external air inlet comes in In the atmosphere channel, the atmosphere is preheated by a heat exchanger, heated by a heat pump system and heated to a constant temperature with the help of a heating device, the heated items on the conveyor belt are heated and dried, the flow of the hot atmosphere is divided by the flow distributor, and a piece of the hot atmosphere is passed through the heat exchanger. After the heat exchange, the exhaust pipe is overhead, and the other side of the hot atmosphere is mixed with the new atmosphere preheated by the heat exchanger and heated by the heat pump system, and then heated by the heating device, then heated and dried, and then divided by the atmosphere flow distributor. The cycle uses the thermal energy in the atmosphere, saving energy and advancing thermal compliance. When the temperature in the working environment is hot, the new heat pump system can be used to cool the working environment while heating the atmosphere.

Improved infrared tunnel furnace, box body, hot air blower, uniform air plate group, high efficiency filter and heater. There are scouring doors on both sides of the box body, a thermal insulation layer is added between the box body and the scouring door, and a hot air outer cavity is formed inside the box body. It is composed of an air equalizing plate. The upper air equalizing plate is set above the high-efficiency filter, the sterilization chamber is below the high-efficiency filter, and the middle air-distributing plate is set between the high-efficiency filter and the sterilization chamber. Bottles, and the lower air distribution plates are arranged on both sides of the bottom of the sterilization chamber. Advantages: The heater is heated on both sides, so that the antibiotic bottle can be protected by 100-level airflow, the temperature is more evenly distributed, the temperature difference between very cold spots is very small, the sterilization effect is good, and the heat source airflow is close to the closed state. , low energy consumption.

If you need to order a tunnel furnace, please consult our service hotline and look forward to your call.