Nowadays, industrial ovens are more common in the market. Now industrial ovens are a relatively stable product type in the process of development. They only need to be continuously improved. In the process of production, they are often It pays more attention to quality and style, as well as the function of controlling temperature. The so-called industrial oven is generally reflected in the process of industrial operation. Often this kind of product is more useful in the market, and it is often used when manufacturing. The requirements and equipment of industrial ovens are strictly in accordance with the following rules:

1. The shape part of the industrial oven: the shape material is made of 2.0 mm thick cold plate bending, the surface is high-temperature electrostatic spray (not ordinary paint) corrosion-resistant, anti-rust, the shape and size are customized according to the requirements, large double doors, with reinforcement Type chrome square steel door lock, handle. The bottom of the oven is equipped with a trolley rail, which is convenient for the trolley to enter and exit.

2. The liner part of the industrial oven: The liner material is made of 1.5mm thick SUS#304 mirror stainless steel plate, which is not rusted, corrosion-resistant, easy to clean, and makes the furnace clean and dust-free. 10 cm thick high-temperature aluminum silicate insulating rock wool is laid around the inner tank, and high-temperature sealing inlaid silicone strips are added around the door, so that the temperature outside the furnace is not difficult. There is an explosion-proof small door with an explosion-proof mechanism behind the oven.

3. The heating part of the industrial oven: built-in stainless steel heat sink heating pipes made in Taiwan on both sides of the furnace cavity, the top of the furnace cavity is equipped with a 0.75KW imported Aideli brand air motor, and a 10-inch semi-transport air wheel in the furnace cavity On the top, the double-sided circulating large air volume is forced to move the air left and right, and the air inlet and exhaust valves are equipped to adjust the air flow and make the temperature in the furnace more uniform.

4. The electrical part of the industrial oven: 380V power supply, three-phase five-wire system, the power is customized according to the size of the industrial oven, and the temperature is customized. The control electric box is located on the right side of the oven, and the microcomputer intelligent LED digital temperature controller is selected. Buffer type output control heater, use SSR solid state relay two-way and two-speed control output heater (when the temperature reaches the set temperature value, the oven is in a constant temperature state, one group of heaters can be turned off at will, and then the entire oven is lowered. power, to achieve power saving effect). Overturning the impact of large instantaneous current impact and unstable temperature control brought about by the traditional zero-crossing trigger, the cooperation with a cost-effective output type thermostat can make the output voltage change smoothly and linearly, the temperature control effect is more stable, and the performance is better. , (the output power can be automatically adjusted according to the temperature error) to make the temperature more accurate.